The Art of Mastering

How to Find Hidden Piping and Valves

If you are a homeowner then you need to know the details of your home like the back of your hand. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. A second valve is usually located further down the line or where the gas pipe first enters.

Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. The shutoff valves of such systems are usually located near the water heater or the furnace.

When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Cold environments usually have the shut off points located in the house so that they do not freeze. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.

In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. For such valves using a metal detector may come in handy since they are usually metallic in nature. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.